Oh it's been a while!! (But there are photos of painted miniatures)

I haven't posted anything on here for almost a year, primarily because I have been painting thousands of Adler Napoleonic figures. If you've seen some of the older posts on here you'll know that they are aprox 8mm in height.

While I have been painting them and putting them on plywood bases, I have not done any 'basing' with them as I could not make up my mind what looked best. Bit stupid really when you consider that they are bloody small.

So I did not feel that there was any point in putting up images of (very small) based but unfinished units.

Along the way, one thing that I firmly landed on was that the basing material / ground cover needed to be relatively light in colour as I think that makes a big difference to the unit's visibility on the table top as well as allowing the paint job to be more visible.

At Cancon this year, I saw a basing paste that I thought might wok - and bought a pot to test. I had also seen a great post from a guy on Facebook by the name of Ricky Bell who gave a 'recipe' for a mixture of Javis flocks that looked pretty good to me. So a few weeks ago I painted up a few units and tried it out. I am very pleased with the outcome. The real test will come when I do some artillery bases and limbers this week.

So, with that decision made, expect to see many many more posts about the Napoleonic project over the coming 18 months because ......

I have been collecting these Napoleonic figures from Adler since 1994. While I have approximately half of my figures painted - there are also another half unpainted and they were intended to be a project that I would work on for years and years.

So to my horror, a few weeks ago I received a message from Leon who owns Adler saying that he is planning to shut down production of the 6mm lines. However, very generously he is allowing existing customers to continue to purchase through to June 2025 so as to be able to finish collections off.

After some hand wringing, I decided I'd better make a concerted effort to get as much completed as possible so that I could identify any gaps that needed to be filled.

Taking photos presents a slight quandery - they need to be close to see the little buggers - but get too close and you see all the shortcuts taken to paint a 6mm figure.

These Wurttemburgers supported Napoleon in the 1809, 1812, 1813 and 1814 campaigns. In most cases I have used the 1809 uniforms.

Firstly a group shot.

First up are the Wurttemburg Jäger zu Pferd Regiments - two regiments each of 24 figures in four squadrons.

Next are two Chevauxleger Regiments, again each regiment consists of four squadrons of six figures.

Then we have the Wurttemburg Light Battalions with their snazzy red plumes and blue lapels and turnbacks.

These took some work. The stock figures do not have a plume - but I wanted the dress uniform because (especially at 6mm) it looks good on the table. So, into each shako I drilled a small hole, glued a piece of brass wire and dipped that into the neck of a bottle of Vallejo Plasttic Putty to give some volume to the plumes. In addition, while not really visible on the photos (and certainly not on the table) each shako has a green fabric trim around it at the midpoint. While these are moulded onto the figures, they are meant to be piped in white on the edges. While it would have looked good, my sanity is worth more - so they just have the green fabric painted.

And finally we have the Milan Battalion which served with the French. I wanted this as I thought the light blue jacket looked good.

Quick photo of the ongoing 6mm Napoleonics for 1813

Work continued through the year on my 6mm Napoleonic project for 1813.   The last post I put up was Saxons for 1813

Two simple shots taken before basing material has been applied - Guard Chasseurs - Old and Young Squadrons

And the rest of their cousins

Over the course of the year I have done approximately 200 French and Allied battalions of infantry and 20 cavalry regiments.  Work started on the Prussians about a month ago.  

But .... I still haven't decided on the basing material I will use so all are simply on painted Litko plywood. 

A little progress on the 1813 Project

 I have been making slow progress on the 1813 project using my Adler miniatures.  

When I say I have 'completed' these - that is up to the stage of flocking the bases.  I've tried various basing styles none of which I have been overly happy with in the past.  I am awaiting some new supplies to try a new option or two and once decided I'll have hundreds of bases to catch up on.  

Over the past four or so months I've finished painting my Saxons except commanders and the guns.  They have come out as:

• Liebgrenadiergarde - 2 battalions
• Converged Grenadiers - 4 battalions
• Line Infantry - 16 battalions
• Light Infantry - 4 battalions
• Garde du Corps
• Von Zastrow Cuirassiers
• Liebcuirassiergarde
• Prinz Klemens Uhlans
• Von Polenz CheveauxLeger
• Hussars
• Horse teams

And for the French I've done 17 battalions of the Marine Artillery that were converted to Line regiments.